version 3.6

DOLMOVE -- Interactive Dollo and Polymorphism Parsimony

© Copyright 1986-2002 by the University of Washington. Written by Joseph Felsenstein. Permission is granted to copy this document provided that no fee is charged for it and that this copyright notice is not removed.

DOLMOVE is an interactive parsimony program which uses the Dollo and Polymorphism parsimony criteria. It is inspired on Wayne Maddison and David Maddison's marvellous program MacClade, which is written for Apple MacIntosh computers. DOLMOVE reads in a data set which is prepared in almost the same format as one for the Dollo and polymorhism parsimony program DOLLOP. It allows the user to choose an initial tree, and displays this tree on the screen. The user can look at different characters and the way their states are distributed on that tree, given the most parsimonious reconstruction of state changes for that particular tree. The user then can specify how the tree is to be rearraranged, rerooted or written out to a file. By looking at different rearrangements of the tree the user can manually search for the most parsimonious tree, and can get a feel for how different characters are affected by changes in the tree topology.

This program is compatible with fewer computer systems than the other programs in PHYLIP. It can be adapted to PCDOS systems or to any system whose screen or terminals emulate DEC VT100 terminals (such as Telnet programs for logging in to remote computers over a TCP/IP network, VT100-compatible windows in the X windowing system, and any terminal compatible with ANSI standard terminals). For any other screen types, there is a generic option which does not make use of screen graphics characters to display the character states. This will be less effective, as the states will be less easy to see when displayed.

The input data file is set up almost identically to the data files for DOLLOP.

The user interaction starts with the program presenting a menu. The menu looks like this:


Interactive Dollo or polymorphism parsimony, version 3.6a3

Settings for this run:
  P                        Parsimony method?  Dollo
  A                     Use ancestral states?  No
  F                  Use factors information?  No
  W                           Sites weighted?  No
  T                 Use Threshold parsimony?  No, use ordinary parsimony
  A      Use ancestral states in input file?  No
  U Initial tree (arbitrary, user, specify)?  Arbitrary
  0      Graphics type (IBM PC, ANSI, none)?  (none)
  L               Number of lines on screen?  24
  S                Width of terminal screen?  80


Are these settings correct? (type Y or the letter for one to change)

The P (Parsimony Method) option is the one that toggles between polymorphism parsimony and Dollo parsimony. The program defaults to Dollo parsimony.

The T (Threshold), F (Factors), A (Ancestors), and 0 (Graphics type) options are the usual ones and are described in the main documentation page and in the Discrete Characters Program documentation page. (Note: at present DOLMOVE actully does not use the A (Ancestral states) information). The F (Factors) option is used to inform the program which groups of characters are to be counted together in computing the number of characters compatible with the tree. Thus if three binary characters are all factors of the same multistate character, the multistate character will be counted as compatible with the tree only if all three factors are compatible with it.

The L option allows the program to take advantage of larger screens if available. The X (Mixed Methods option is not available in DOLMOVE. The U (initial tree) option allows the user to choose whether the initial tree is to be arbitrary, interactively specified by the user, or read from a tree file. Typing U causes the program to change among the three possibilities in turn. I would recommend that for a first run, you allow the tree to be set up arbitrarily (the default), as the "specify" choice is difficult to use and the "user tree" choice requires that you have available a tree file with the tree topology of the initial tree. Its default name is intree. The program will ask you for its name if it looks for the input tree file and does not find one of this name. If you wish to set up some particular tree you can also do that by the rearrangement commands specified below. The T (threshold) option allows a continuum of methods between parsimony and compatibility. Thresholds less than or equal to 0 do not have any meaning and should not be used: they will result in a tree dependent only on the input order of species and not at all on the data! Note that the usual W (Weights) option is not available in MOVE. We hope to add it soon.

After the initial menu is displayed and the choices are made, the program then sets up an initial tree and displays it. Below it will be a one-line menu of possible commands, which looks like this:

NEXT? (Options: R # + - S . T U W O F C H ? X Q) (H or ? for Help)

If you type H or ? you will get a single screen showing a description of each of these commands in a few words. Here are slightly more detailed descriptions:

R
("Rearrange"). This command asks for the number of a node which is to be removed from the tree. It and everything to the right of it on the tree is to be removed (by breaking the branch immediately below it). The command also asks for the number of a node below which that group is to be inserted. If an impossible number is given, the program refuses to carry out the rearrangement and asks for a new command. The rearranged tree is displayed: it will often have a different number of steps than the original. If you wish to undo a rearrangement, use the Undo command, for which see below.

#
This command, and the +, - and S commands described below, determine which character has its states displayed on the branches of the trees. The initial tree displayed by the program does not show states of sites. When # is typed, the program does not ask the user which character is to be shown but automatically shows the states of the next binary character that is not compatible with the tree (the next character that does not perfectly fit the current tree). The search for this character "wraps around" so that if it reaches the last character without finding one that is not compatible with the tree, the search continues at the first character; if no incompatible character is found the current character is shown, and if no current character is shown then the first character is shown. If the last character has been reached, using + again causes the first character to be shown. The display takes the form of different symbols or textures on the branches of the tree. The state of each branch is actually the state of the node above it. A key of the symbols or shadings used for states 0, 1 and ? are shown next to the tree. State ? means that either state 0 or state 1 could exist at that point on the tree, and that the user may want to consider the different possibilities, which are usually apparent by inspection.
+
This command is the same as # except that it goes forward one character, showing the states of the next character. If no character has been shown, using + will cause the first character to be shown. Once the last character has been reached, using + again will show the first character.

-
This command is the same as + except that it goes backwards, showing the states of the previous character. If no character has been shown, using - will cause the last character to be shown. Once character number 1 has been reached, using - again will show the last character.

S
("Show"). This command is the same as + and - except that it causes the program to ask you for the number of a character. That character is the one whose states will be displayed. If you give the character number as 0, the program will go back to not showing the states of the characters.

. (dot)
This command simply causes the current tree to be redisplayed. It is of use when the tree has partly disappeared off of the top of the screen owing to too many responses to commands being printed out at the bottom of the screen.

T
("Try rearrangements"). This command asks for the name of a node. The part of the tree at and above that node is removed from the tree. The program tries to re-insert it in each possible location on the tree (this may take some time, and the program reminds you to wait). Then it prints out a summary. For each possible location the program prints out the number of the node to the right of the place of insertion and the number of steps required in each case. These are divided into those that are better, tied, or worse than the current tree. Once this summary is printed out, the group that was removed is inserted into its original position. It is up to you to use the R command to actually carry out any the arrangements that have been tried.

U
("Undo"). This command reverses the effect of the most recent rearrangement, outgroup re-rooting, or flipping of branches. It returns to the previous tree topology. It will be of great use when rearranging the tree and when a rearrangement proves worse than the preceding one -- it permits you to abandon the new one and return to the previous one without remembering its topology in detail.

W
("Write"). This command writes out the current tree onto a tree output file. If the file already has been written to by this run of DOLMOVE, it will ask you whether you want to replace the contents of the file, add the tree to the end of the file, or not write out the tree to the file. The tree is written in the standard format used by PHYLIP (a subset of the Newick standard). It is in the proper format to serve as the User-Defined Tree for setting up the initial tree in a subsequent run of the program.

O
("Outgroup"). This asks for the number of a node which is to be the outgroup. The tree will be redisplayed with that node as the left descendant of the bottom fork. The number of steps required on the tree may change on re-rooting. Note that it is possible to use this to make a multi-species group the outgroup (i.e., you can give the number of an interior node of the tree as the outgroup, and the program will re-root the tree properly with that on the left of the bottom fork).

F
("Flip"). This asks for a node number and then flips the two branches at that, so that the left-right order of branches at that node is changed. This does not actually change the tree topology (or the number of steps on that tree) but it does change the appearance of the tree.

C
("Clade"). When the data consist of more than 12 species (or more than half the number of lines on the screen if this is not 24), it may be difficult to display the tree on one screen. In that case the tree will be squeezed down to one line per species. This is too small to see all the interior states of the tree. The C command instructs the program to print out only that part of the tree (the "clade") from a certain node on up. The program will prompt you for the number of this node. Remember that thereafter you are not looking at the whole tree. To go back to looking at the whole tree give the C command again and enter "0" for the node number when asked. Most users will not want to use this option unless forced to.

H
("Help"). Prints a one-screen summary of what the commands do, a few words for each command.

?
("huh?"). A synonym for H. Same as Help command.

X
("Exit"). Exit from program. If the current tree has not yet been saved into a file, the program will ask you whether it should be saved.

Q
("Quit"). A synonym for X. Same as the eXit command.

OUTPUT

If the A option is used, then the program will infer, for any character whose ancestral state is unknown ("?") whether the ancestral state 0 or 1 will give the fewest changes (according to the criterion in use). If these are tied, then it may not be possible for the program to infer the state in the internal nodes, and many of these will be shown as "?". If the A option is not used, then the program will assume 0 as the ancestral state.

When reconstructing the placement of forward changes and reversions under the Dollo method, keep in mind that each polymorphic state in the input data will require one "last minute" reversion. This is included in the counts. Thus if we have both states 0 and 1 at a tip of the tree the program will assume that the lineage had state 1 up to the last minute, and then state 0 arose in that population by reversion, without loss of state 1.

When DOLMOVE calculates the number of characters compatible with the tree, it will take the F option into account and count the multistate characters as units, counting a character as compatible with the tree only when all of the binary characters corresponding to it are compatible with the tree.

ADAPTING THE PROGRAM TO YOUR COMPUTER AND TO YOUR TERMINAL

As we have seen, the initial menu of the program allows you to choose among three screen types (PC, ANSI, and none). If you want to avoid having to make this choice every time, you can change some of the constants in the file phylip.h to have the terminal type initialize itself in the proper way, and recompile. The constants that need attention are ANSICRT and IBMCRT. Currently these are both set to "false" on Macintosh and on Unix/Linux systems, and IBMCRT is set to "true" on Windows systems. If your system has an ANSI compatible terminal, you might want to find the definition of ANSICRT in phylip.h and set it to "true", and IBMCRT to "false".

MORE ABOUT THE PARSIMONY CRITERION

DOLMOVE uses as its numerical criterion the Dollo and polymorphism parsimony methods. The program defaults to carrying out Dollo parsimony.

The Dollo parsimony method was first suggested in print in verbal form by Le Quesne (1974) and was first well-specified by Farris (1977). The method is named after Louis Dollo since he was one of the first to assert that in evolution it is harder to gain a complex feature than to lose it. The algorithm explains the presence of the state 1 by allowing up to one forward change 0-->1 and as many reversions 1-->0 as are necessary to explain the pattern of states seen. The program attempts to minimize the number of 1-->0 reversions necessary.

The assumptions of this method are in effect:

  1. We know which state is the ancestral one (state 0).
  2. The characters are evolving independently.
  3. Different lineages evolve independently.
  4. The probability of a forward change (0-->1) is small over the evolutionary times involved.
  5. The probability of a reversion (1-->0) is also small, but still far larger than the probability of a forward change, so that many reversions are easier to envisage than even one extra forward change.
  6. Retention of polymorphism for both states (0 and 1) is highly improbable.
  7. The lengths of the segments of the true tree are not so unequal that two changes in a long segment are as probable as one in a short segment.

One problem can arise when using additive binary recoding to represent a multistate character as a series of two-state characters. Unlike the Camin-Sokal, Wagner, and Polymorphism methods, the Dollo method can reconstruct ancestral states which do not exist. An example is given in my 1979 paper. It will be necessary to check the output to make sure that this has not occurred.

The polymorphism parsimony method was first used by me, and the results published (without a clear specification of the method) by Inger (1967). The method was published by Farris (1978a) and by me (1979). The method assumes that we can explain the pattern of states by no more than one origination (0-->1) of state 1, followed by retention of polymorphism along as many segments of the tree as are necessary, followed by loss of state 0 or of state 1 where necessary. The program tries to minimize the total number of polymorphic characters, where each polymorphism is counted once for each segment of the tree in which it is retained.

The assumptions of the polymorphism parsimony method are in effect:

  1. The ancestral state (state 0) is known in each character.
  2. The characters are evolving independently of each other.
  3. Different lineages are evolving independently.
  4. Forward change (0-->1) is highly improbable over the length of time involved in the evolution of the group.
  5. Retention of polymorphism is also improbable, but far more probable that forward change, so that we can more easily envisage much polymorhism than even one additional forward change.
  6. Once state 1 is reached, reoccurrence of state 0 is very improbable, much less probable than multiple retentions of polymorphism.
  7. The lengths of segments in the true tree are not so unequal that we can more easily envisage retention events occurring in both of two long segments than one retention in a short segment.

That these are the assumptions of parsimony methods has been documented in a series of papers of mine: (1973a, 1978b, 1979, 1981b, 1983b, 1988b). For an opposing view arguing that the parsimony methods make no substantive assumptions such as these, see the papers by Farris (1983) and Sober (1983a, 1983b), but also read the exchange between Felsenstein and Sober (1986).

Below is a test data set, but we cannot show the output it generates because of the interactive nature of the program.


TEST DATA SET

     5    6
Alpha     110110
Beta      110000
Gamma     100110
Delta     001001
Epsilon   001110